Siemens SIMATIC ET 200S Installation And Operating Manual page 109

Terminal assignment
The terminal assignment of the EM 4/8 F-DI 24 VDC PROFIsafe for the applicable terminal
modules TM-E30S44-01, TM-E30C44-01, TM-E30S46-A1, and TM-E30C46-A1 is shown in
the following figure.
Figure 7-17
DI
Vs1
Vs1
at TM-E...46-A1: AUX 1 bus implemented. Connection to terminals A3 through A16 for any
connection of PE (individual grouping of sensor power supplies possible)
ET 200S Distributed I/O System - Fail-Safe Modules
Hardware Installation and Operating Manual, 07/2005, A5E00103686-04
Terminal Assignment of TM-E...44-01/TM-E...46-A1 for EM 4/8 F-DI DC24V PROFIsafe
Fail-safe digital input
Internal sensor power supply 1 for DI 0 to DI 3
Internal sensor power supply 2 for DI 4 to DI 7
7.5 4/8 F-DI VDC24V PROFIsafe Digital Electronic Module
Fail-Safe Modules
7-49