Siemens SIMATIC ET 200S Installation And Operating Manual page 100

Fail-Safe Modules
7.4 PM-D F DC24V PROFIsafe power module
Terminal assignment
On the PM-D F DC24V PROFIsafe, you connect only the 24 V DC load voltage power supply
and chassis. The power module is wired on the special terminal module.
The following table shows the terminal assignment of the PM-D F DC24V PROFIsafe for the
permitted terminal module TM-PF30S47-F1 (order number 3RK1 903-3AA00).
Table 7-14
Terminal
20
21
27
28
7-40
Terminal Assignment of the TM-PF30S47-F1
Designation
24 VDC 24 VDC rated load voltage for:
Inserted power module and
•
Voltage buses SG 1 through SG 6 and U 1
•
M Ground
24 VDC 24 VDC rated load voltage for:
Inserted power module and
•
Voltage buses SG 1 through SG 6 and U 1
•
M Ground
ET 200S Distributed I/O System - Fail-Safe Modules
Hardware Installation and Operating Manual, 07/2005, A5E00103686-04