Siemens SIMATIC ET 200S Installation And Operating Manual page 3

Preface
Purpose of this Manual
The information in this manual is a reference source for operations, function descriptions,
and technical specifications of the fail-safe modules of the ET 200S distributed I/O system.
Basic Knowledge Requirements
This manual is a supplement to the ET 200S Distributed I/O System manual. Working with
this manual requires general knowledge of automation engineering. You also require
experience of using the
Scope of this Manual
PM-E F pm DC24V PROFIsafe Power Module
PM-E F pp DC24V PROFIsafe power module
PM-D F DC24V PROFIsafe power module
4/8 F-DI DC24 V PROFIsafe Digital Electronic
Module
4 F-DO DC24V/2A PROFIsafe digital electronic
module
What's New
Compared with the previous version, this manual includes the following major
changes/additions:
• Ability to connect ET 200S to PROFINET I/O (with modules as of order numbers above)
• New parameter "Behavior after channel faults"
ET 200S Distributed I/O System - Fail-Safe Modules
Hardware Installation and Operating Manual, 07/2005, A5E00103686-04
STEP 7
basic software and the ET 200S distributed I/O system.
Module Order Number
6ES7 138-4CF02-0AB0
6ES7 138-4CF41-0AB0
3RK1 903-3BA01
6ES7 138-4FA02-0AB0
6ES7 138-4FB02-0AB0
Release Number
and Higher
01
01
01
01
01
iii