Siemens SIMATIC ET 200S Installation And Operating Manual page 52

General technical specifications
6.2 Standards and Approvals
TÜV Certificate and Standards
Fail-safe modules are certified for the following standards. Refer to the report accompanying
the TÜV certificate for the current version/edition of the standard.
Standards/Directives
Functional Safety
DIN V 19250
DIN V VDE 0801
DIN V VDE 0801/A1
IEC 61508-1 to 7
prEN 50159-1 and 2
Standards/Directives
Process Engineering
DIN V 19251
VDI/VDE 2180-1 to 5
NE 31
ISA S 84.01
Requesting TÜV Certificate
You can request copies of the TÜV certificate and the accompanying report at the following
address:
Siemens Aktiengesellschaft
Bereich Automatisierungstechnik
A&D AS RD ST
Postfach 1963
D-92209 Amberg
6-6
Standards/Directives
Machine Safety
98/37/EC
EN 60204-1
EN/ISO 954-1/13849-1
prEN 954-2
Standards/Directives
Fuel Engineering
DIN VDE 0116, Clause
prEN 50156-1
EN 230, Clause
EN 298, Clauses. 7.3, 8, 9, and 10
DIN V ENV 1954 (revoked)
Hardware Installation and Operating Manual, 07/2005, A5E00103686-04
Additional Standards/Guidelines
DIN VDE 0110-1
DIN VDE 0160
93/68/EEC
92/31/EEC and 93/68/EEC
DIN EN 55011 (revoked)
EN 50081-2 (revoked)
EN 61000-6-2
DIN EN 61131-2
ET 200S Distributed I/O System - Fail-Safe Modules