Secret Duress Button; System History - 2gig Technologies GO!CONTROL User Manual

Go!Control Wireless Security System | User Guide
Setting the Duress User Code
On the User Management Screen, press
1
the User 8 (Duress) button.
A confirmation screen appears: Press
2
Create Duress User.
Enter a four‐digit code for the new
3
Duress User Code and press Ok.
To confirm the Duress User Code, enter
4
the Code again and press Ok.
A confirmation screen appears. Press Ok.
5
The User 8 edit screen appears. To return
6
to the User Management Screen, press
Back.

Secret Duress Button

On the Home Screen, in the lower right
corner, the system logo always appears. The
system logo is the secret duress button.
While Armed
With the system armed, pressing the logo
displays the standard disarm code entry
screen. Use a valid User Code or a Duress
User Code to disarm the system. The system
disarms normally, but a silent duress report
is sent to the Central Station and they will
dispatch help.
While Disarmed
You can also use the secret duress button
can also be used while the system is
disarmed. Pressing the logo displays a code
30 ©2013 2GIG Technologies Inc. All Rights Reserved.
entry screen. Enter the Duress User Code
and a silent duress report is sent to the
Central Station and they will dispatch help.
The system remains disarmed.

SYSTEM HISTORY

The Control Panel keeps a log of system
events in the order in which they occur. Each
event is marked with the date and time that
the event occurred.
To make reading the log easier, the system
history display can be filtered to show
selected events only. The events that can be
filtered for the system history log display are:
• Arm or Disarm of the system
• Bypasses of sensors (force bypasses and
manual bypasses)
• Alarms (alarms are displayed with a red
stripe)
• Alerts (alerts are displayed with a yellow
stripe)
Some system events always display
regardless of the filters selected. These
events include:
• Walk test started or terminated.
• Programming mode started or
terminated.
To view the system history log, do the
following:
From the Home Screen, press Security.
1
From the Security Screen, press Menu.
2
On the Menu Screen, press Toolbox.
3
Enter a valid User Code to access the
4
toolbox.
From the Toolbox Screen (1 of 3), press
5
System History. The log of system events
appears. Use the ↑ and ↓ arrows to
scroll through the log.