Quick Arming; Quick Bypass; Quick Exit; Auto Un Bypas - 2gig Technologies GO!CONTROL User Manual

Go!Control Wireless Security System | User Guide

Quick Arming

Quick Arming allows you to arm your system
without having to enter a User Code. When
you press the Stay or Away button, the
system will start to arm without requesting a
User Code.
• Off
• On

Quick Bypass

Normally sensors that are open at the time
the system is armed will require force
bypassing by entering your User Code. The
system can be set so a User Code is not
required to bypass open sensors when the
system is armed.
• Off
• On

Quick Exit

The Quick Exit option allows you to start the
Exit Delay while the system is armed. This
allows you to leave the premises without
having to disarm and rearm the system.
When the Quick Exit option is on, a Quick
Exit button will display on the security
screen. Press the button to start the Exit
Delay.
After Quick Exit, the system will fully re‐arm
in the mode that it was in before (Stay or
Away Mode).
• Off
• On
Auto Un-bypass
Normally, sensors manually bypassed with
the User Toolbox will automatically have
their bypasses removed when the system is
disarmed. The system can be set so sensors
that have been manually bypassed will stay
bypassed until the bypass is manually
removed
• Off
• On
39 ©2013 2GIG Technologies Inc. All Rights Reserved.

Auto Stay

The Auto Stay option will change the arming
mode if no one exits after arming the system
in Away Mode. When the system is armed in
the Away Mode the Exit Delay will begin.
With the Auto Stay option on, if a designated
exit/entry door does not open and close
during the Exit Delay, the system
will arm in the Stay Mode instead of the
Away Mode.
• Off
• On

Key Fob Arm/Disarm Sound

The system can be set so when it's armed or
disarmed by a wireless key fob, a beep will
sound through the internal and external
sounders to indicate that the key fob's signal
was received. This helps in installations
where the Control Panel is not visible or
there are no other system status indications
at the key fob's location.
• Off
• On

Key Fob Disarm After Sound

The system can be set so when it's disarmed
with a wireless key fob after an alarm has
occurred, a special series of beeps will sound
through the internal and external sounders.
This option serves as an alert to warn you to
approach the premises with caution as an
intruder may still be present.
• Off
• On
IMPORTANT: The system can be set so
when it's disarmed with a wireless key
fob after an alarm has occurred, a special
series of beeps will sound through the
internal and external sounders. This
option serves as an alert to warn you to
approach the premises with caution as
an intruder may still be present.