Panel Test; Telephonetest; Cell Phone Test - 2gig Technologies GO!CONTROL User Manual

Go!Control Wireless Security System | User Guide
When all sensors have been tested. A
3
confirmation screen appears.

Panel Test

The panel test checks the Control Panel's
indicators and sounder.
A list of panel tests appears on the
1
Panel Test Screen. Use the ↑ and ↓
arrows to scroll through the list.
Press each test button and answer Yes
2
or No to the test question.
Press Ok when all panel questions
3
have been answered. A confirmation
screen appears.
To exit System, Sensor, and Panel
4
Testing, press Ok.
Telephone Test
If your security system is connected to
your telephone line it can communicate
with the Central Station using your
telephone line. Your system can send its
alarm messages and system trouble or
status messages using the land‐based
telephone system. You can also use the
telephone connection for any 2‐way audio
communications with the Central Station.
Test your Security
IMPORTANT:
System weekly to ensure
continued protection and proper
system operation.
You can test the telephone connection
using the Toolbox.
From the Home Screen, press Security.
1
From the Security Screen, press Menu.
2
From the Menu Screen, press Toolbox.
3
32 ©2013 2GIG Technologies Inc. All Rights Reserved.
To access the Toolbox, enter the Master
4
User Code.
Use the ← and → arrows to select
5
Toolbox Screen (3 of 3).
On the Toolbox Screen (3 of 3), press
6
Telephone Test.
To begin the test enter the Master User
7
Code again.
The system displays the Telephone Test
Status Screen. The top part of the screen
shows each function that is being tested.
Use the ↑ and ↓ arrows to scroll
8
through the status messages. The
bottom part of the screen shows the
results of each test.
If any tests fail, note what messages
9
were displayed, and contact your alarm
installer to troubleshoot your system.
After the testing is complete, press Ok to
10
return to the Toolbox.

Cell Phone Test

If your security system is equipped with a
built in cellular radio, it can communicate
with the Central Station using it by sending
its alarm messages and system trouble or
status messages. You can also use the
system's cellular radio for any 2‐way audio
communications with the Central Station.