Messaging; System Messages; Displaying Messages; Readingmessages - 2gig Technologies GO!CONTROL User Manual

MESSAGING

SYSTEM MESSAGES

Your security system supports receiving
messages from the Central Station. The
messages can be about system upgrades,
additional services, special regional weather
alerts, etc. The messages can be sent for all
system users to read, or as confidential
messages that only the Master User can
read. Messages can be tagged by the sender
in the following manner:
• Standard (blue message icon)
• Urgent (yellow message icon)
• Emergency Priority (red message icon)
Up to 31 text messages can be stored in the
Control Panel's memory. You can review
them through the Control Panel's display.
Displayed messages are sorted in the
following manner:
• Type
• Date
• Alphabetically

Displaying Messages

When a message is sent to the Control Panel,
3 beeps sound and the message icon displays
on the Security Screen. Standard messages
display a blue message icon with a
number of unread messages in the upper
24 ©2013 2GIG Technologies Inc. All Rights Reserved.
right corner. Urgent messages display a
yellow message icon with an
symbol in the upper right corner. Emergency
messages display a
with the bell symbol in the upper right
corner.
READING MESSAGES
When a message icon appears on your Home
Screen, do the following:
Press the message icon button. The
1
message list displays. The status bar
shows the number of messages in
memory, number of unread, and number
of priority messages. Unread messages
display in bold.
Use the ↑ or ↓ arrows to scroll through
2
the message list.
Press the message line itself to read the
3
message.
Press Back to return to the message list,
4
or press Delete to erase the message.
NOTE: If you check the Mark Read box, the
message remains on the message list (If
you decide not to delete it), but it no
longer displays in bold.
When deleting a message, a
5
confirmation screen displays. Press
Delete Message, or to return to the
message, press Cancel.
attention
red message icon