Configuring Tacacs+ Authorization - Alcatel-Lucent 7450 System Management Manual

Configuring TACACS+ Authorization

In order for TACACS+ authorization to function, TACACS+ authentication must be enabled first.
See Enabling TACACS+ Authentication on page
On the local router, use the following CLI commands to configure RADIUS authorization:
CLI Syntax: config>system>security
The following displays a TACACS+ authorization configuration example:
A:ALA-1>config>system>security>tacplus# info
----------------------------------------------
----------------------------------------------
A:ALA-1>config>system>security>tacplus#
7450 ESS System Mangement Guide
tacplus
authorization
no shutdown
authorization
timeout 5
server 1 address 10.10.0.5 secret "test1"
server 2 address 10.10.0.6 secret "test2"
server 3 address 10.10.0.7 secret "test3"
server 4 address 10.10.0.8 secret "test4"
server 5 address 10.10.0.9 secret "test5"
92.
Security
Page 93