Alcatel-Lucent 7450 System Management Manual page 248

Security Commands
Table 17: Show Distributed CPU Protection Policer Output Fields (Continued)
Sample Output
*A:nodeA# show service id 33 sap 1/1/3:33 dist-cpu-protection detail
===============================================================================
Service Access Points(SAP) 1/1/3:33
===============================================================================
Distributed CPU Protection Policy :
-------------------------------------------------------------------------------
Statistics/Policer-State Information
===============================================================================
-------------------------------------------------------------------------------
Static Policer
-------------------------------------------------------------------------------
Policer-Name
Card/FP
Protocols Mapped
Exceed-Count
Detec. Time Remain
Operational (adapted) rate parameters:
Policer-Name
Card/FP
Protocols Mapped
Exceed-Count
Detec. Time Remain
Operational (adapted) rate parameters:
... (snip)
*A:nodaA# show service id 33 sap 1/1/3:34 dist-cpu-protection detail
Page 248
Label
Detec. Time Remain
Hold-Down Remain
All Dyn-Plcr Alloc.
Dyn-Policer Alloc.
: arp
: 1/1
: arp
: 0
: 0 seconds
Oper. Packets : 5 ppi
Oper. Initial Delay: 6 packets
Oper. Depth : 0 packets
: dhcp
: 1/1
: dhcp
: 0
: 0 seconds
Oper. Kbps : 2343 kbps
Oper. Depth : 0 bytes
The remaining time in the detection-time countdown during which a
policer in the exceed state is being monitored to see if it is once again
conformant.
The remaining time in the hold-down countdown during which a
policer is treating all packets as exceeding.
Indicates that all the dynamic enforcement policers have been allo-
cated and instantiated for a given local-monitor.
Indicates that a dynamic policer has been instantiated.
test1
Policer-State
Hold-Down Remain.
Oper. Within
Policer-State
Hold-Down Remain.
Oper. MBS
7450 ESS System Mangement Guide
Description
: Conform
: none
: 8 seconds
: Conform
: none
: 240 kilobytes