required
Syntax
required [lowercase count] [uppercase count] [numeric count] [special-character count]
no required
Context
config>system>security>password>complexity-rules
Description
Force the minimum number of different character classes required.
The no form of the command resets to default.
Default
no required
Parameters
count — The minimum count of characters classes.
dynsvc-password
Syntax
dynsvc-password password [hash|hash2]
no dynsvc-password
Context
config>system>security>password
Description
Configure the password which enables the user to configure dynamic services.
Default
no dynsvc-password
Parameters
password — Configures the password which enables a user to become a system administrator. The
hash — Specifies the key is entered in an encrypted form. If the hash parameter is not used, the key
hash2 — Specifies the key is entered in a more complex encrypted form. If the hash2 parameter is
enable-admin-control
Syntax
enable-admin-control
Context
config>system>security>password
Description
Enable the user to become a system administrator.
tacplus-map-to-priv-lvl
Syntax
tacplus-map-to-priv-lvl [admin-priv-lvl]
7450 ESS System Mangement Guide
Values
0-10
maximum length can be up to 20 characters if unhashed, 32 characters if hashed, 54 characters if
the hash2 keyword is specified.
is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in encrypted
not used, the less encrypted hash form is assumed.
Security
Page 149