Configuring A Syslog Target - Alcatel-Lucent 7450 System Management Manual

Configuring a Syslog Target

Log events cannot be sent to a syslog target host until a valid syslog ID exists.
Use the following CLI syntax to configure a syslog file:
CLI Syntax: config>log
The following displays a syslog configuration example:
A:ALA-12>config>log# info
----------------------------------------------
...
...
----------------------------------------------
A:ALA-12>config>log#
7450 ESS System Mangement Guide
syslog syslog-id
description description-string
address ip-address
log-prefix log-prefix-string
port port
level {emergency|alert|critical|error|warning|notice|in-
fo|debug}
facility syslog-facility
syslog 1
description "This is a syslog file."
address 10.10.10.104
facility user
level warning
exit
Event and Accounting Logs
Page 437