Shutdown In-Band Port - Alcatel-Lucent 7450 System Management Manual

Shutdown In-Band Port

A shutdown on the in-band port that the trap-target address is bound to causes the route to that
particular trap target to be removed from the route table. When the SNMP module is notified of
this event, it marks the trap-target as inaccessible and saves the sequence-id of the first SNMP
notification that will be missed by the trap-target.
Example:
The Replay from field is updated with the sequence-id of the first event that will be replayed
when the trap-target address is added back to the route table.
*A:SetupCLI# show log snmp-trap-group 44
===============================================================================
SNMP Trap Group 44
===============================================================================
Description : none
-------------------------------------------------------------------------------
Name
Address
Port
Version
Community
Sec. Level
Replay
Replay from : event #3819
Last replay : never
-------------------------------------------------------------------------------
Name
Address
Port
Version
Community
Sec. Level
Replay
Replay from : n/a
Last replay : never
===============================================================================
*A:SetupCLI#
7450 ESS System Mangement Guide
config>log>snmp-trap-group# exit all
#configure port 1/1/1 shutdown
#
# tools perform log test-event
#
: xyz-test
: 10.10.10.3
: 162
: v2c
: xyztesting
: none
: enabled
: test2
: 20.20.20.5
: 162
: v2c
: xyztesting
: none
: disabled
Event and Accounting Logs
Page 433