Table 16: Show Distributed Cpu Protection Output Fields - Alcatel-Lucent 7450 System Management Manual

eth-cfm-monitoring
Syntax eth-cfm-monitoring [{service-id service-id sap-id sap-id} | {service-id service-id sdp-id
sdp-id:vc-id}]
Context show>system>security>cpu-protection
Description This command displays sources exceeding their eth-cfm-monitoring rate limit.
dist-cpu-protection
Syntax dist-cpu-protection
Context show>card>fp
Description This command displays Distributed CPU Protection parameters and status at the per card and
forwarding plane level.
Output

Table 16: Show Distributed CPU Protection Output Fields

*A:nodeA# show card 1 fp 1 dist-cpu-protection
7450 ESS System Mangement Guide
Label
Card
Forwarding
Plane(FP)
Dynamic Enforcement
Policer Pool
Dynamic-Policers
Currently In Use
Hi-WaterMark Hit
Count
Hi-WaterMark Hit
Time
Dynamic-Policers
Allocation Fail
Count
The card identifier
Identifies the instance of the FP (FastPath) chipset. Some cards have
a single FP (for example, an IOM3-XP) and some cards can contain
multiple FPs (for example, an IOM2 has two FPs and an XCM can
house two FPs via its two XMAs).
The configured size of the dynamic-enforcement-policer-pool for
this card/FP.
The number of policers from the dynamic enforcement policer pool
that are currently in use. The policers are allocated from the pool and
instantiated as per-object-per-protocol dynamic enforcement policers
after a local monitor triggered for an object (such as a SAP or Net-
work Interface).
The maximum Currently In Use value since it was last cleared (clear
card x fp y dist-cpu-protection)
The time at which the current Hi-WaterMark Hit Count was first
recorded.
Indicates how many times the system attempted to allocate dynamic
enforcement policers but could not get enough the fill the request.
Description
Page 245
Security