Table 27: Output Parameters - Alcatel-Lucent 7450 System Management Manual

card slot-number — The physical slot number for the card.
fp fp-number — Identifies the instance of the FP (FastPath) chipset. Some cards have a single FP (for
Output Users Output — The following table describes show users output fields.

Table 27: Output Parameters

Sample Output
*A:Dut-A# tools dump security dist-cpu-protection violators enforcement interface
card 4 fp 1
===============================================================================
Distributed Cpu Protection Current Interface Enforcer Policer Violators
===============================================================================
Interface
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Violators on Slot-4 Fp-1
-------------------------------------------------------------------------------
test
test
test
-------------------------------------------------------------------------------
[S]-Static [D]-Dynamic [M]-Monitor
-------------------------------------------------------------------------------
===============================================================================
7450 ESS System Mangement Guide
Values 1— n (n is platform dependant)
example, an IOM3-XP) and some cards can contain multiple FPs (for example, an IOM2 has two
FPs and an XCM can house two FPs via its two XMAs).
Values 1— 2
Label
Interface
Policer/Protocol
[S] / [D]
Hld Rem
The name of the router interface
The configured name of the static policer (indicated with an [S]) or the
DCP protocol name for a dynamic policer (indicated with a [D]).
indicates a static vs dynamic policer
The remaining time in the hold-down countdown during which a
policer is treating all packets as exceeding.
Policer/Protocol
staticArpPolicer
icmp
ospf
Description
Hld Rem
[S] none
[D] none
[D] none
Security
Page 279