Table 24: Pass/Fail Login Attempts - Alcatel-Lucent 7450 System Management Manual

Security Commands
With the introduction of the PKI on an SR (SSH Server) the authentication process can be done via
PKI or password. SSH client usually authenticate via PKI and password if PKI is configured on the
client. In this case PKI takes precedence over password in most clients.
All client authentications are logged and display in the show>system>security>user detail.
shows the rules where pass and fail attempts are logged.

Table 24: Pass/Fail Login Attempts

Authentica-
tion Order (i.e., putty)
Private Key
Programmed
1. Public Key
2. Password
1. Public Key
(only)
TABLE
*A:Dut-C# show system security user detail
===============================================================================
Users
===============================================================================
User ID
-------------------------------------------------------------------------------
admin
-------------------------------------------------------------------------------
Number of users : 1
Page 268
Client
Public Key
Configured
Yes Yes
Yes Yes (No match
between client
and server. Go to
password.)
Yes
No N/A
No N/A
Yes Yes
Yes Yes (No match
between client
and server. Go
go password.)
Yes
No
New User Permissions
Pwd console ftp li snmp
n y
Server
(i.e., SR)
Password
Configured
N/A
Yes
No Yes
Yes
No
N/A
N/A
N/A
Password
Expires
n n n never
7450 ESS System Mangement Guide
CLI
Show System Security
Attempts (SR)
Logins Failed
Attempts Logins
Increment
Increment
Increment
Increment
Increment
Increment
Increment
Increment
Increment
Login Failed Local
Attempts Logins Conf
4 0 y
Table 24