Configuring an Event Log
Common Configuration Tasks
The following sections are basic system tasks that must be performed.
•
•
•
•
•
•
•
Configuring an Event Log
A event log file contains information used to direct events, alarms, traps, and debug information to
their respective destinations. One or more event sources can be specified. File IDs, SNMP trap
groups, or syslog IDs must be configured before they can be applied to an event log ID.
Use the following CLI syntax to configure a log file:
CLI Syntax: config>log
Page 422
Configuring a File ID on page 424
Configuring an Event Log on page 422
Configuring an Accounting Policy on page 425
Configuring Event Control on page 426
Configuring a Log Filter on page 428
Configuring an SNMP Trap Group on page 429
Configuring a Syslog Target on page 437
log-id log-id
description description-string
filter filter-id
from {[main] [security] [change] [debug-trace]}
to console
to file file-id
to memory [size]
to session
to snmp [size]
to syslog syslog-id}
time-format {local|utc}
no shutdown
7450 ESS System Mangement Guide