Configuring Throttle Rate - Alcatel-Lucent 7450 System Management Manual

Configuring Throttle Rate

This command configures the number of events and interval length to be applied to all event types
that have throttling enabled by the event-control command.
Use the following CLI syntax to configure the throttle rate.
CLI Syntax: config>log#
The following displays a throttle rate configuration example:
*A:gal171>config>log# info
---------------------------------------------
----------------------------------------------
*A:gal171>config>log#
7450 ESS System Mangement Guide
throttle-rate events [interval seconds]
throttle-rate 500 interval 10
event-control "bgp" 2001 generate throttle
Event and Accounting Logs
Page 427