Configuration Notes - Alcatel-Lucent 7450 System Management Manual

Ethernet service switch

Hide thumbs Also See for 7450:

Table of Contents

Configuration Notes

This section describes SNMP configuration caveats.

To avoid management systems attempting to manage a partially booted system,

SNMP will remain in a shut down state if the configuration file fails to complete

during system startup. While shutdown, SNMP gets and sets are not processed.

However, notifications are issued if an SNMP trap group has been configured.

In order to enable SNMP, the portions of the configuration that failed to load must be

initialized properly. Start SNMP with the config>system>snmp>no shutdown CLI

Use caution when changing the SNMP engine ID. If the SNMP engine ID is changed

in the config>system>snmp> engineID engine-id context, the current configuration

must be saved and a reboot must be executed. If not, the previously configured SNMP

communities and logger trap-target notify communities will not be valid for the new

7450 ESS System Mangement Guide