Chapter
2
Configuring The LQ-1600K Emulation With Control Codes
Set Left Margin (For Hanzi Big5 Printer Only)
ASCII Code ASSC 0
Hex Code
Dec Code
Purpose
Comment
Set Line Pitch (For Hanzi Big5 Printer Only)
ASCII Code ASSC 0
Hex Code
Dec Code
Purpose
Comment
Set Logic Right Margin (For Hanzi Big5 Printer Only)
ASCII Code ASSC 0
Hex Code
Dec Code
Purpose
Comment
78
T
I
n1 n2 n3
ASSC 30 54 6C
n1 n2 n3
ASSC 48 84 108 n1 n2 n3
To set the left margin in 1/10 inch (10 CPI equivalent)
according to the number of half-width characters, that is in
n1n2n3 from the left most position.
Where
n1, n2, n3 = 0x30 ~ 0x39
This control code does not function while in non-DBCS mode.
T
3
n1 n2 n3 n4
ASSC 30 54 30
n1 n2 n3 n4
ASSC 48 84 48
n1 n2 n3 n4
To set the line spacing by dot in 300 dpi, which will convert to
180 dpi. n1n2n3 is in ASCII value.
Where:
n1, n2, n3, n4 = 0x30 ~ 0x39
This control code does not function while in non-DBCS mode.
T
y
n1n2n3n4
ASSC 30 54 79
n1n2n3n4
ASSC 48 84 121 n1n2n3n4
To set right margin by current right margin - n1n2n3n4.
n1n2n3n4 is dot in 300 dpi, and will be converted to 180 dpi
Where:
n1, n2, n3, n4 = 0x30 ~ 0x39
This control code does not function while in non-DBCS mode.
This will affect the Set Right Margin front panel setting.