Line Spacing N/60 Inch - InfoPrint LQ-1600K Programmer's Reference Manual

Line Spacing n /60 Inch
ASCII Code ESC A n
1B 41 n
Hex Code
Dec Code 27 65 n
Purpose Sets a line spacing of n /60 inch for subsequent line feeds.
Where:
n = 0 through 85 (all other values are ignored)
Comment When this control sequence is received, all subsequent line
feeds are n /60-inch until a new line spacing is selected or the
printer is reset. This setting overrides line spacing set at the
control panel. When n = 0, the current line spacing is printed.
Small values of n may result in overlapping lines. Overlapping
lines may also occur if print attributes such as Elongated
(Double High), Superscript, or Subscript characters are used
on the same line. If lines overlap, printing speed is reduced.
Any values set by ESC 3 (line spacing n /180 inch) are
replaced.
Example The following example illustrates 20/60-inch line spacing.

Line Spacing n/60 Inch

53