Turn On/Off Ocrb Printing; Underline - InfoPrint LQ-1600K Programmer's Reference Manual

Chapter 2
Configuring The LQ-1600K Emulation With Control Codes

Turn On/Off OCRB Printing

ASCII Code ASSC 0
Hex Code
Dec Code
Purpose
NOTE: When OCRB is turned on, the OCRB character can be printed out.
Comment

Underline

ASCII Code ESC – n
Hex Code
Dec Code
Purpose
Comment
Example
86
z n
ASSC 30 7A n
ASSC 48 122 n
Where:
n = 0, 1, 48, 49
The default is n = 0.
Turn on/off OCRB mode as follows:
n = 0 or 48 - turns off OCRB mode
n = 1 or 49 - turns on OCRB mode
This command affects the front panel setting of "OCBR
Selection."
This command only works in DBCS mode.
1B 2D n
27 45 n
Turns automatic underlining on and off.
Where:
n = NUL (hex 00) or 0 (hex 30) to turn off underlining
n = SOH (hex 01) or 1 (hex 31) to turn on underlining
Spaces are underlined, but graphics and grey scale characters
are not. This control code does not function while in DBCS
mode.
The following program illustrates underlining.