Chapter
2
Configuring The LQ-1600K Emulation With Control Codes
Double Strike (Cancel)
ASCII Code ESC H
Hex Code
Dec Code
Purpose
Comment
Example
Double Wide Print
ASCII Code ESC W n
Hex Code
Dec Code
Purpose
Comment
36
1B 48
27 72
Turns off the double strike printing set by ESC G or ESC !.
This control code resets only the double strike print attribute.
Other print attributes, such as double wide printing, are not
affected.
The following program illustrates double strike character
printing.
1B 57 n
27 87 n
Turns double wide print on and off.
Where:
n = SOH (hex 01) or 1 (hex 31) turns double wide print on
n = NUL (hex 00) or 0 (hex 30) turns double wide print off
When ESC W is received, all characters are printed twice as
wide until reset. This command overrides SO, ESC SO, and
DC4.