Select Dbcs Print Quality - InfoPrint LQ-1600K Programmer's Reference Manual

Chapter 2
Configuring The LQ-1600K Emulation With Control Codes

Select DBCS Print Quality

ASCII Code FS x n
Hex Code
Dec Code
Purpose
Comment
64
1C 78 n
28 120 n
Selects the typeface for printing in DBCS mode.
Where:
n = NUL (hex 00) or 0 (hex 30) selects LQ print quality
n = SOH (hex 01) or 1 (hex 31) selects Hi-Speed print quality
n = STX (hex 02) or 2 (hex 32) selects Near LQ print quality
n = ETX (hex 03) or 3 (hex 33) selects Super Hi-Speed print
quality
n = EOT (hex 04) or 4 (hex 34) selects Normal print quality
n = ENQ (hex 05) or 5 (hex 35) selects Ultra Hi-Speed print
quality
This command overrides control panel print quality selections.