Select Italic Character Set; Select Print Quality - InfoPrint LQ-1600K Programmer's Reference Manual

Chapter 2
Configuring The LQ-1600K Emulation With Control Codes

Select Italic Character Set

ASCII Code ESC t n
Hex Code
Dec Code
Purpose
Comment

Select Print Quality

ASCII Code ESC x n
Hex Code
Dec Code
Purpose
Comment
66
1B 74 n
27 116 n
Selects the italics character set from hex 80 through hex FF.
Where:
n = SOH (hex 01) or 1 (hex 31) selects the graphics character
set
n = NUL (hex 00) or 0 (hex 30) selects the italics character set
The graphics character set is assumed to be the IBM Graphics
Code.
1B 78 n
27 120 n
Selects print quality.
Where:
n = NUL (hex 00) or 0 (hex 30) selects Hi-Speed
n = SOH (hex 01) or 1 (hex 31) selects LQ
n = STX (hex 02) or 2 (hex 32) selects Near LQ
n = ETX (hex 03) or 3 (hex 33) selects Super Hi-Speed
n = EOT (hex 04) or 4 (hex 34) selects Normal
n = ENQ (hex 05) or 5 (hex 35) selects Ultra Hi-Speed
This command overrides control panel print quality selections.