Line Spacing N/360 Inch - InfoPrint LQ-1600K Programmer's Reference Manual

Line Spacing n /360 Inch
ASCII Code ESC + n
1B 2B n
Hex Code
Dec Code 27 43 n
Purpose Specifies the line spacing at n /360-inch increments.
Where:
n = 0 through 255
All line feeds following receipt of this code are at n /360-inch line
Comment
spacing until a new line spacing is selected or the printer is
reset. Line spacing set by this control code overrides line
spacing set at the control panel. When n = 0, the current line
spacing is printed.
If the vertical distance to move is other than a multiple of n /360
inch, the remainder is added to the next paper motion
command.
Use caution when combining this control code with other print
attributes such as Elongated (Double High), Superscript, or
Subscript, because overlapping lines may occur. Print speed is
reduced if lines overlap.
Example The following example illustrates n /360-inch line spacing.

Line Spacing n/360 Inch

55