Table of Contents
Advertisement
TGL SETUP Submenus
Active
•
Yes (default). When enabled, all data is parsed by the TGL emulation.
Non-TGL data is absorbed.
•
No. When disabled, non-TGL text data prints.
Character Set
Selects the character set: either PC-850, PC-8, or 8859-2 Latin 2. The factory
default is PC-850.
Slash Zero
•
Enable. When enabled, the zero character is overlaid with a slash
character.
•
Disable (default). If disabled, the zero character does not have a slash
character.
Image Scale
•
Enable. When enabled, images are scaled from TEC printer resolution
(306 dpi) to the resolution of the TGL printer (300 dpi).
•
Disable (default). If disabled, scaling will not take place, resulting in
images that are 2% larger than images printed on the TEC printer.
Printing is faster though, and the image keeps the right proportions.
SFCC Select
Use this menu to select the SFCC, SFCC-Separator, and SFCC-Terminator
sets.
•
Auto Select (default). The printer selects the SFCC set based upon the
received host data.
•
<ESC><LF><NULL> is a predefined set. The ESC character is the
SFCC, the LF is the SFCC-Separator, and the NULL character is the
SFCC-Terminator.
•
{ I } is a predefined set. The { character is the SFCC, the I is the SFCC-
Separator, and the } character is the SFCC-Terminator.
•
User Defined. When you select User Defined, three additional menus
appear in the tree. These menus allow the SFCC, SFCC-Separator, and
SFCC-Terminator to be configured individually.
SFCC
This menu is only present when "User Defined" is selected in the SFCC
menu. Using this menu, the SFCC can be set to any value between 0x0 and
0xFF. The factory default is 0x7B.
TGL SETUP Submenus
9
Advertisement
Table of Contents
