Printer Select; Proportional Spacing, Select/Deselect; Rotate Character 90 Degrees Counter-Clockwise - InfoPrint LQ-1600K Programmer's Reference Manual

Printer Select

ASCII Code DC1
Hex Code 11
Dec Code 17
Purpose Places printer in the selected state.
Comment The configuration parameter Printer Select must be set to
Enable.
This control code allows the printer to receive and print data
from the host if it was deselected by DC3. If the printer was not
deselected by DC3, this code is ignored.

Proportional Spacing, Select/Deselect

ASCII Code ESC p n
Hex Code 1B 70 n
27 112 n
Dec Code
Where:
n = NUL (hex 00) or 0 (hex 30) turns proportional mode off
n = SOH (hex 01) or 1 (hex 31) turns proportional mode on
Purpose Turns proportional mode on and off.
Comment This command only affects the character printing in ASCII
mode. This command affects the "Prop. Spacing" setting in the
front panel.

Rotate Character 90 Degrees Counter-Clockwise

ASCII Code FS J
Hex Code 1C 4A
Dec Code 28 74
Purpose Rotates characters while in DBCS mode (vertical printing
mode).
Comment This control code does not function while in non-DBCS mode.
Printer Select
61