Table of Contents
Advertisement
Set Relative Horizontal Print Position In 1/120 Inches
Set Relative Horizontal Print Position In 1/120 Inches
ASCII Code ESC \ n1 n2
1B 5C n1 n2
Hex Code
Dec Code
27 92 n1 n2
Purpose
Moves the simulated print head to a relative horizontal print
position (in dots), using 1/120 inch increments in Near LQ
mode and 1/180 inch increments in all other modes.
Where:
n1 = 0 through 127
n2 = 0 through 255
Comment
Adds ( n1 + ( n2 x 256)) dots to the horizontal position of the
simulated print head. The number sent is two's complement,
with negative numbers moving to the left. The command is
ignored if it would move the simulated print head beyond the
page margins.
Set Right Margin (For Hanzi Big5 Printer Only)
ASCII Code ASSC 0
Hex Code
ASSC 30 54 51
Dec Code
ASSC 48 84 81
Purpose
To set margin in 1/10 inches (10 CPI equivalent) according to
the number of half-width characters.
Where
n1, n2, n3 = 0x30 ~ 0x39
Comment
This control code does not function while in non-DBCS mode.
T
Q
n1 n2 n3
n1 n2 n3
n1 n2 n3
81
Advertisement
Table of Contents
