Transient Withstand Capability; Specifications And Characteristics; Cleaning The Oscilloscope; Contacting Agilent - Agilent Technologies 1000B Series User Manual

7 Reference

Transient Withstand Capability

Maximum input voltage for analog inputs:
C A U T I O N
• CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk
• with N2862A/N2863A 10:1 probe: CAT I 600 V (DC + peak AC)

Specifications and Characteristics

For complete, up- to- date specifications and characteristics, find the
1000B Series oscilloscopes data sheet at:

Cleaning the Oscilloscope

If the instrument requires cleaning:
1 Remove power from the instrument.
2 Clean the external surfaces of the instrument with a soft cloth
Do not use too much liquid in cleaning the oscilloscope. Water can enter the
C A U T I O N
oscilloscope's front panel, damaging sensitive electronic components.
3 Make sure that the instrument is completely dry before reconnecting it

Contacting Agilent

Agilent Technologies contact information can be found at:
www.agilent.com/find/contactus
148
dampened with a mixture of mild detergent and water.
to a power source.
www.agilent.com
Agilent 1000B Series Oscilloscopes User's Guide