Figure 14 X-Y Display Format Showing Out-Of-Phase Waveforms - Agilent Technologies 1000B Series User Manual

X-Y Format
This format compares the voltage level of two waveforms point by point. It
is useful for studying phase relationships between two waveforms. This
format only applies to channels 1 and 2. Choosing the X- Y display format
displays channel 1 on the horizontal axis and channel 2 on the vertical
axis.
The oscilloscope uses the untriggered sample acquisition mode and
waveform data is displayed as dots. The sampling rate can vary from
4 kSa/s to 100 MSa/s, and the default sampling rate is 1 MSa/s.
Figure 14
Agilent 1000B Series Oscilloscopes User's Guide
Roll
In Roll mode, the waveform display rolls from right to
left, and the minimum horizontal scale setting is
500 ms/div. No trigger or horizontal position control is
available. Roll mode is used in applications similar to the
ones for which Slow Scan mode is used (see
Mode"
X-Y Display Format Showing Out-of-Phase Waveforms
on page 40).
Displaying Data 2
"Slow Scan
43