Table of Contents
Advertisement
5
Saving, Recalling, and Printing Data
To save screens to BMP or PNG format files
You can save oscilloscope display screens (in BMP or PNG format) to an
external USB drive when it is connected to a rectangular USB host port.
1 Press [Save/Recall].
2 In the Storage menu, press Storage.
3 Continue pressing the Storage softkey or turn the
120
To save to or recall from internal storage:
a Press Internal.
b In the Internal menu, press Location.
c Continue pressing the Location softkey or turn the
select the desired internal storage location.
The "(N)" suffix shows that nothing has been saved to the location.
The "(S)" suffix shows waveforms have been previously saved to the
location.
d Press Save or Recall.
To save to or recall from external storage (when a USB drive is
connected to the front panel USB host port):
a Press External.
b Use the disk manager dialog to navigate to the folder where you
want to save the file or to select the file you want to load (see
navigate the directory hierarchy"
c In the External menu:
To save the setup, press New File, enter the filename (see
folder/file names"
To recall the selected setup (.stp file), press Recall.
select one of:
8-Bitmap
8- bit BMP format.
24-Bitmap
24- bit BMP format.
PNG
Portable Network Graphics format.
on page 123).
on page 124), and press Save.
Agilent 1000B Series Oscilloscopes User's Guide
entry knob to
"To
"To edit
entry knob to
Advertisement
Table of Contents
