Step 4. Input A Waveform - Agilent Technologies 1000B Series User Manual

Step 4. Input a waveform

1 Input a waveform to a channel of the oscilloscope.
To avoid damage to the oscilloscope, make sure that the input voltage at the BNC
C A U T I O N
connector does not exceed the maximum voltage (300 Vrms, CAT I).
Agilent 1000B Series Oscilloscopes User's Guide
Use one of the supplied passive probes to input the Probe Comp signal
from the front panel of the oscilloscope.
Getting Started 1
23