Table of Contents
Advertisement
To store recorded waveforms
To store recorded waveforms:
1 Press [Acquire].
2 In the Acquire menu, press Sequence.
3 In the Sequence menu, press Mode.
4 Continue pressing the Mode softkey or turn the
To select the start frame
1 In the Sequence menu ([Acquire] > Sequence > Mode=Storage), press
2 Turn the
To select the end frame
1 In the Sequence menu ([Acquire] > Sequence > Mode=Storage), press
2 Turn the
To select internal/external recording storage location
1 In the Sequence menu ([Acquire] > Sequence > Mode=Storage), press
To save a recording
1 In the Sequence menu ([Acquire] > Sequence > Mode=Storage), press Save.
2 If the External location has been selected, use the Disk Manager to
Agilent 1000B Series Oscilloscopes User's Guide
"Storage".
Start Frame.
entry knob to select a number from l to 1000.
End Frame.
entry knob to select a number from l to 1000.
Location to toggle between Internal and External.
Internal
Recordings are saved and loaded from oscilloscope
internal memory.
External
Recordings are saved, loaded, exported, and imported
from an external USB drive.
name and save the waveform recording file. See
Manager"
on page 122.
Capturing Data
entry knob to select
"Using the Disk
3
83
Advertisement
Table of Contents
