Transient Withstand Capability - Agilent Technologies 6000 Series User Manual

Transient Withstand Capability

C A U T I O N
C A U T I O N
C A U T I O N
C A U T I O N
6000 Series Oscilloscope User's Guide
Maximum input voltage for analog inputs:
CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk
CAT II 100 Vrms, 400 Vpk
with 10073C or 10074C 10:1 probe: CAT I 500 Vpk, CAT II 400 Vpk
Do not exceed 5 Vrms in 50
protection is enabled in 50 mode, and the 50 load will disconnect if
greater than 5 Vrms is detected. However, the input could still be
damaged, depending on the time constant of the signal.
The 50 input protection mode only functions when the oscilloscope
is powered on.
Maximum input voltage for logic channels:
±40 V peak CAT I; transient overvoltage 800 Vpk
Characteristics and Specifications
mode on the 2-channel models. Input
9
299