To Set Up Pulse Width Triggers - Agilent Technologies 1000B Series User Manual

3 Capturing Data
5 Press Source and continue pressing the softkey or turn the
6 Press Slope and continue pressing the softkey or turn the

To set up pulse width triggers

A pulse width trigger occurs when a pulse that matches the pulse
definition is found in a waveform.
The width setting can be adjusted from 20 ns to 10 s.
1 Press [Menu].
2 In the Trigger menu, press Mode.
3 Continue pressing the Mode softkey or turn the
4 Then, either push the
5 Press Source and continue pressing the softkey or turn the
88
knob to select the waveform to trigger on:
CH1 - CH2
The oscilloscope input channel.
EXT
The external trigger input.
AC Line
The AC power line.
to select the edge to trigger on:
Rising edge.
Falling edge.
Both rising and falling edges.
"Pulse".
knob to select the waveform to trigger on:
CH1 - CH2 The oscilloscope input channel.
EXT The external trigger input.
entry knob or press Mode again.
Agilent 1000B Series Oscilloscopes User's Guide
entry
entry knob
entry knob to select
entry