To export/import masks
1 Because you can only export and import masks from an external drive,
2 In the Mask menu ([Utility] > Mask Test > MaskSetting), press Imp./Exp..
3 Use the Disk Manager to select the file and import or export the mask.
When importing a mask while the Location is Internal or when importing or recalling a
N O T E
mask while the Location is External, the mask is imported or recalled to internal memory.
To activate the mask, you must set the Location to Internal, then Recall from internal
memory.
Agilent 1000B Series Oscilloscopes User's Guide
select the External mask location. See
storage location"
on page 140.
See
"Using the Disk Manager"
Oscilloscope Utility Settings
"To select internal/external mask
on page 122.
6
141