Step 3. Load The Default Oscilloscope Setup; Figure 2 [Default Setup] Key - Agilent Technologies 1000B Series User Manual

1 Getting Started

Step 3. Load the default oscilloscope setup

You can recall the factory default setup any time you want to return the
oscilloscope to its original setup.
1 Press the front panel [Default Setup] key.
Figure 2
2 When the Default menu appears, press [Menu On/Off] to turn off the
22
[Default Setup] Key
menu.
(The Undo softkey in the Default menu lets you cancel the default setup
and go back to the previous setup.)
Agilent 1000B Series Oscilloscopes User's Guide