Playing Back By Event Search - Nuvico HDoCS DT_E/P Instruction Manual

Stop
30s forward
Previous day
Full Screen
Process bar
NOTE
 The

represents normal recording (manual or schedule);
motion | alarm, motion & alarm).
 Playback progress bar: use the mouse to click any point of the progress bar to locate special frames.

6.1.3 Playing Back by Event Search

Play back recording files on one or several channels searched out by restricting event type (e.g. alarm input and
motion detection).
Steps:
1. Enter the Playback interface.
Menu > Playback
2. Select the Event in the drop-down list on the top-left side.
3. Select Alarm Input or Motion as the event type, edit the Start time and End time.
4. Click Search button to get the search result information. You may refer to the right-side bar for the result.
5. Click button to play back the file.
You can click the Back button to back to the search interface.
NOTE
Pre-play and post-play can be configured.
6. (Optional) If multiple channels are triggered recording by the alarm input, clicking the
pop up a synchoronouse playback channel selection window. Select channel(s) you want to play and click
the OK button.
7. Playback management.
The toolbar in the bottom part of Playback interface can be used to control playing process.
Pause play/ Play/
/
Single-frame play
Speed down
Next day
Exit
Video type bar
indicates the start time and end time of the record files.
represents event recording (motion, alarm,
47
30s reverse
Speed up
Scaling up/down the
/
time line
Video type
button will