Using An Auxiliary Monitor; Main/Aux Output Switching - Nuvico HDoCS DT_E/P Instruction Manual

3.2.2 Using an Auxiliary Monitor

Certain features of the Live View are also available while in an Aux monitor. These features include:
•
Single Screen: Switch to a full screen display of the selected camera. Camera can be selected from a
dropdown list.
•
Multi-screen: Switch between different display layout options. Layout options can be selected from a
dropdown list.
•
Previous Screen: When displaying less than the maximum number of cameras in Live View, clicking this
feature will switch to the previous set of displays.
•
Next Screen: When displaying less than the maximum number of cameras in Live View, clicking this
feature will switch to the next set of displays.
•
Quick Set: Set the video output mode to Standard, Bright, Gentle or Vivid.
•
Menu Output Mode: Select the menu output mode to HDMI/VGA, Main CVBS or Auto.
•
PTZ Control: The shortcut to enter the PTZ control interface.
•
Main Monitor: Enter Main operation mode.
NOTE
In the live view mode of the main output monitor, the menu operation is not available while Aux output mode is
enabled.

3.2.3 Main/Aux Output Switching

When the HDMI/VGA output is configured as the main output, you can perform the following operation to
switch to CVBS output as the main output.
Steps:
1. Use the mouse wheel to double-click on the HDMI/VGA output screen, and the following message box
pops up.
2. Set the mouse wheel to double-click on the screen again to switch to the Aux output, or click Cancel to
cancel the operation.
3. Select the Menu Output Mode to Main CVBS from the right-click menu on the CVBS output monitor.
4. On the pop-up message box, click Yes to restart the device to enable the CVBS output as the main output.
You can select the Menu Output Mode under Menu>Configuration>More Settings to Auto or HDMI/VGA and
then restart the device to switch the main output back to HDMI/VGA output.
23