Live View; Automatic Sequence; Digital Zoom - Nuvico EVLite EVL-400 Instruction Manual

2. LIVE VIEW

The live view displays each channel at 30 frames per second in NTSC video type.

2.1 AUTOMATIC SEQUENCE

Please refer to Section IV. Setup (Sequential Setup) for selecting and activating the automatic
sequence modes. Press and hold the DISPLAY button for 2 second to activate the sequence mode.
Pressing the display mode will change the display mode to the single channel display initially, and
continue to sequence through all the channels in full screen mode. The following illustrations
demonstrate sample display sequence.
Single Channel view mode automatic sequence

2.2 DIGITAL ZOOM

During the live view mode or during the playback, it is possible to zoom in to a section of the screen to
get a close-up view of the section.
Press the ZOOM button to bring up the zoom window.
Press the directional buttons to move the zoom window to
the desired location.
- 21 -