Managing Hdd Group; Setting Hdd Groups - Nuvico HDoCS DT_E/P Instruction Manual

10.2 Managing HDD Group

10.4.1 Setting HDD Groups

Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD
group through HDD settings.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
2. Set the Mode to Group
3. Click the Apply button and the following Attention box will pop up.
" Reboot to take effect of the changing of the storage mode. Continued?"
4. Click the Yes button to reboot the device to activate the changes.
5. After reboot of device, enter the HDD Information interface.
Menu > HDD > General
6. Select HDD from the list and click the
7. Select the Group number for the current HDD.
NOTE
The default group No. for each HDD is 1.
8. Click the OK button to confirm the settings.
9. In the pop-up Attention box, click the Yes button to finish the settings.
icon to enter the Local HDD Settings interface.
89