Configuring General Settings - Nuvico HDoCS DT_E/P Instruction Manual

13.1 Configuring General Settings

You can configure the output resolution, system time, mouse pointer speed, etc.
Steps:
1.
Enter the General Settings interface.
Menu > Configuration > General
2.
Select the General tab.
3.
Configure the following settings:
•
Language: The default language used is English.
•
CVBS Output Standard: Select the CVBS output standard to NTSC or PAL, which must be the same
with the video input standard (for DT-P SERIES ONLY ).
•
Resolution: Select the output resolution, which must be the same with the resolution of the VGA/HDMI
display.
•
Time Zone: Select the time zone.
•
Date Format: Select the date format.
•
System Date: Select the system date.
•
System Time: Select the system time.
•
Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
•
Enable Wizard: Enable/disable the Wizard when the device starts up.
•
Enable ID Authentication: Enable/disable the use of the login password.
4.
Click the Apply button to save the settings.
106