Quick Button For Multi Screen Display; Quick Multi Split Mode Change; Repositioning - Nuvico EV2-400 Instruction Manual

3. Quick button for multi screen Display.

3.1. Quick multi split mode change

- Press F1 button on the remote controller + <Number>
For example, press F1 button then number 8.
The eight channel view mode will be displayed.
<Note> 6,4,8,10,13 split mode must be checked on <Spit mode> to use this
function.
3.2.

Repositioning

To reposition a camera view on screen,
2.3.1. Virtual Remote controller
①
Press button on virtual remote controller by using mouse, then
on screen. Move
or virtual control pad.
② Press a Numeric button to reposition the selected camera. Press [Enter] button to exit here with
saving changes.
2.3.2. Remote controller
: Press (EXT.SEARCH) button on remote controller, then
on screen.
2.3.3. Mouse
: Drag the selected camera to the position you wish to reposition by using mouse.
icon to the desired position by pressing directional buttons on remote controller
20
Mark will be displayed
Mark will be displayed
EV2 Series DVR