Operations In Live View Mode; Using The Mouse In Live View - Nuvico HDoCS DT_E/P Instruction Manual

Table of Contents

Advertisement

3.2 Operations in Live View Mode

In live view mode, there are many functions provided. The functions are listed below.
Single Screen: show only one screen on the monitor.
Multi-screen: show multiple screens on the monitor simultaneously.
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for each
screen on the configuration menu before enabling the auto-switch. Menu>Configuration>Live
View>Dwell
Time.
Start Recording: normal record and motion detection record are supported.
Quick Set: select the output mode to Standard, Bright, Gentle or Vivid.
Playback: play back the recorded videos for current day.
Aux/Main output switch: the DVR checks the connection of the output interfaces to define the main
and auxiliary output interfaces. The priority level for the main and aux output is HDMI>VGA>CVBS.
This means if the HDMI is used, it will be the main output. If the HDMI is not used, the VGA output
will be the main output. See the table below.
HDMI
1
2
3
×
4
×
√ means the interface is in use, × means the interface is out of use or the connection is invalid. And
the HDMI, VGA and CVBScan be used at the same time.
When the aux output is enabled, the main output cannot do any operation, and you can do some basic operation
on the live view mode for the Aux output.

3.2.1 Using the Mouse in Live View

Name
Menu
Single Screen
Multi-screen
Previous Screen
Next Screen
Start/Stop
Auto-switch
Table 3. 2 Priorities of Interfaces
VGA
×
×
Table 3. 4 Mouse Operation in Live View
Description
Enter the main menu of the system by right clicking the mouse.
Switch to the single full screen by choosing channel number from the dropdown
list.
Adjust the screen layout by choosing from the dropdown list.
Switch to the previous screen.
Switch to the next screen.
Enable/disable the auto-switch of the screens.
NOTE
The dwell time of the live view configuration must be set before using Start Auto-
switch.
21
CVBS
Main output
HDMI
HDMI
VGA
CVBS
Auxiliary
output
VGA
CVBS
CVBS

Advertisement

Table of Contents
loading

Table of Contents