Viewing System Information; Searching And Exporting Log Files - Nuvico HDoCS DT_E/P Instruction Manual

12.1 Viewing System Information

Steps:
1. Enter the System Information interface.
Menu > Maintenance > System Info
2. You can click the Device Info, Camera, Record, Alarm, Network and HDD tabs to view the system
information of the device.
NOTE
This alarm information is not available for DT-E Series

12.2 Searching and Exporting Log Files

The operation, alarm, exception and information of the DVR can be stored in log files, which can be viewed and
exported at any time.
Steps:
1. Enter the Log Search interface.
Menu > Maintenance > Log Search
2. Set the log search conditions to refine your search, including the Start Time, End Time, Major Type and
Minor Type.
3. Click the Search button to start search log files.
4. The matched log files will be displayed on the list shown below.
NOTE
Up to 2000 log files can be displayed each time.
5. You can click the
Figure 12. 4. And you can also click the
6. If you want to export the log files, click the Export button to enter the Export menu.
7. Select the backup device from the dropdown list of Device Name.
8. Click the Export to export the log files to the selected backup device.
You can click the New Folder button to create new folder in the backup device, or click the Format button
to format the backup device before log export.
NOTE
 Please connect the backup device to DVR before operating log export.
 The log files exported to the backup device are named by exporting time, e.g.,
20110514124841logBack.txt.
button of each log or double-click it to view its detailed information, as shown in
button to view the related video files if available
101