Nuvico HDoCS DT_E/P Instruction Manual page 36

•
•
option does not supported by TVI cameras, while the WD1 resolution is available all the time.
4) Click Apply to save the settings.
5) You can copy the settings to other channels by clicking Copy, if the setting can also be
used for other cameras.
NOTE
You can copy the same settings to the cameras with same signal, e.g., the channel No. 1-3 connect to the TVI
cameras, and the channel No.4 connects to an analog camera, and then the settings of channel No. 1 can be only
copied to channel 2 and 3.
3.Set encoding parameters for sub-stream.
1) Select the Substream tab.
2) Select a camera in the camera dropdown list.
3) Configure the parameters.
4) Click Apply to save the settings.
4. (Optional) If the parameters can also be used to other cameras, click Copy to copy the settings to other
channels
Video Stream: Main stream and sub-stream are selectable for recording.
When you select sub-stream, you can record for a longer time with the same
storage space.
Enable 960 Mode: The option is supported by analog cameras. Enabling the 960
mode to enable the WD1 resolution for the main stream, otherwise, the
resolution supports up to 4CIF. And the
36