Manual Record - Nuvico HDoCS DT_E/P Instruction Manual

5.5 Manual Record

Follow the steps to set parameters for the manual record. Using manual record, you don't need to set a schedule
for recording.
Steps:
1. Enter the Manual settings interface.
Menu> Manual
2. Enable manual record.
Click the status icon
Or click the status icon
3. Disable manual record.
Click the status icon
Or click the status icon
NOTE
After rebooting, all the manual records enabled are canceled.
before camera number to change it to
of Analog to enable manual record of all channels.
to change it to .
of Analog to disable manual record of all channels.
40
.