Table of Contents
Advertisement
User Manual of Digital Video Recorder
5
POWER
6
JOG SHUTTLE Control
7
USB Interface
8
IR Receiver
Rear Panels
No.
Item
1
VIDEO IN
2
VIDEO OUT
3
AUDIO IN
4
USB Port
5
HDMI
6
VGA
7
AUDIO OUT
8
Network Interface
9
RS-485 Interface
10
Power Supply
11
Power Switch
12
GND
13
LINE IN
14
eSATA
15
RS-232 Interface
In Auto-switch mode, it can be used to stop /start auto switch.
Power on/off switch.
Move the active selection in a menu. It will move the selection up
and down.
In Live View mode, it can be used to cycle through different
channels.
In the Playback mode, it can be used to jump 30s forward/backward
in video files.
In PTZ control mode, it can control the movement of the PTZ
camera.
Universal Serial Bus (USB) ports for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
Receiver for IR remote control.
Description
BNC interface for TVI and analog video input.
BNC connector for video output.
RCA connector
Universal Serial Bus (USB) port for additional devices.
HDMI video output connector.
DB15 connector for VGA output. Display local video output and
menu.
RCA connector
Connector for network
Connector for RS-485 devices. T+ and T- pins connect to R+ and R-
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices,
Connector for alarm input.
Connector for alarm output.
AC 100 ~ 240V power supply.
Switch for turning on/off the device.
Ground
BNC connector for audio input.
Connects external SATA HDD, CD/DVD-RW.
Connector for RS-232 devices.
11
Advertisement
Table of Contents
