Nuvico HDoCS DT_E/P Instruction Manual page 22

Start recording of all channels, Normal Record and Motion Detection Recording
Start Recording
are selectable from the dropdown list.
A shortcut to enter the IP camera management interface.(For HDVR series only)
Add IP Camera
Output Mode is configurable with Standard, Bright, Gentle and Vivid options.
Quick Set
Enter the playback interface and start playing back the video of the selected
Playback
channel immediately.
A shortcut to enter the PTZ control interface of the selected camera.
PTZ Control
Switch to the auxiliary output mode and the operation for the main output is
Aux Monitor
disabled.
Note:
operation is disabled; you need to switch back to the Main output with the F1 button on front
panel or VOIP/MON button on IR remote control and then press the Enter button.
If you enter Aux monitor mode and the Aux monitor is not connected, the mouse
22